2017年7月3日星期一

How to upgrade for your android TV BOX Magicsee IRON&IRON+?




 How to upgrade for your TV BOX Magicsee IRON&IRON+?


   There is Newest android tv box out from Magicsee Company, IRON & IRON+. 
 





2017 New !Amlogic S912 Android tv box 3g+16G/32G Magicsee Iron+ with Dual wifi Bluetooth 4K android 7.0 tv box


   There is good news for the IRON'S fans, there is new firmware is out ,firstly, you can download by this link :
IRON( S905X) : 

IRON+(S912):

How to upgrade for your android TV BOX Magicsee IRON&IRON+?Pls follow this steps:

1.Pls prepare those device for upgrade as below:
   1 * Computer  
1 * USB cable  
1*Small iron needle (diameter can not be greater than 3MM)
   


                    

  
2.  Install USB_Burning_Tool_v2.0.7.2 tool as below, after the installation is complete, there is a shortcut icon in the desktop, double-click the icon to open the tool.

3. After you installed the tools, pls go into C:\Program Files\Amlogic\USB_Burning_Tool,and then Make new folder name as License as below:

 4.Copy and Paste the file (usid.ini) to this new folder License :



5.Open the Tools  USB_Burning_Tool_v2.0.7.2_build2



     
6. Open the “File”, then pls go to choose the firmware from your PC .


7. Setting the tools as below:



8. Connect the USB port on PC by USB cable
With a small iron needle from the AV hole and hold for 5 second, then plug the USB cable to the motherboard on the OTG interface (the machine's USB2 interface).
Wait until the corresponding port on the tool shows "Connection is successful", then you can remove the small Iron needle from AV port.
 


9. Press “Start” after Setting as blow:



10. when the bar going to 100%, it means successfully.
 
  




11. Boot up and restore factory settings





After reset factory setting ,the box will be reboot again.
Enjoying the new!

 

没有评论:

发表评论